Brazilian
2 x 10MW PARAT High Voltage Electrode Boilers to Potsdam, Germany
Parat Halvorsen AS have recently received an order for two 10 MW High Voltage boilers from AS:SCAN.
The High Voltage Electrode boilers will be installed by AS:SCAN and KAM in a project by Stadtwerke Potsdam: Energie und Wasser
The hot water boilers will be used for grid frequency regulation and internal power management at the power plant. Heat will be delivered to district heating and to a new 45.000 m3 heat storage tank.
PARAT Halvorsen is proud to have been selected also this time for our boilers converting excess green power to heat.
Visit us in Germany:
E-World Energy & Water - 10-12 February 2015, Hall B3, Stand 147 and
Hannover Messe - 13-17 April 2015, Hall 27, Stand M74.
Contact us to set up a meeting and to get your free ticket to any of these exhibitions.
-----
PARAT’s IEH Electrode Boiler has been designed and developed by the PARAT Halvorsen’s in-house engineers and manufactured in its workshop in Norway for more than 20 years to a compact design of up to 60MW in one unit. It allows users to switch from cold to full load in less than 5 minutes, with 30 seconds from minimum to full load. Minimum load is below 1%. Significantly, there is no current to earth, no electrode wear and the boiler requires only minimum maintenance.
Power from wind and solar energy can be utilised in the boiler for steam or hot water purposes. Hot water can be stored during peak production periods, and utilised when needed in district heating.
Parat’s remote monitoring system enables web-based remote monitoring of the boiler plant from anywhere in the world. This also includes online troubleshooting and upgrades of the control software from the PARAT Halvorsen AS service centre in Norway.
Another significant feature is that the electrode boiler system can be delivered in a complete turnkey boiler house.
